99200
 
99200
 
15 Watt Hybrid
Proton Rad Hard 100k+® DC – DC Converters
 
The model 99200 is a triple output sequenced power converter ideally suited for
FET RF amplifiers or SSPA's where outputs are requried to turn on and off in sequence
so the negative gate vlotage rises first and decats last with respect to the positive outputs.
The 99200 turn-on sequencing feature is controlled by precision rad-hard 100K+® MOSFET
switches, ensuring reliable operation at FET loads that are enhanced at zero voltage
and uncontrolled without negative gate bias.
Turn-off sequencing is achieved by pre-set RC networks, ensuring complete control
of the negative gate output as the positive outputs decay first.
Other input voltages and output voltage combinations are available on special order.
 
Rad Hard: TID > 100kRad(Si)
2:1 margin: Operates beyond 200kRad TID
No SEE: LET > 82MeV*cm2/mg
Proton Resistant: no optocuplers used
Specifically designed for redundant or individual space applications
Completely self contained Thick Film Hybrid DC-DC Converter
No external filter caps required
Fully isolated design
"Inhibit-not" function
Power on soft start
200 kHz operation for low ripple and fast response time
Built-in EMI input filter meets MIL-STD-461C requirements CE01, CE03, CS01, CS02 and CS06
Short circuit and overvoltage protection
Built-in test capability
 
INPUT: 28 VDC nominal
     Range: 18 to 50 VDC
ISOLATION:
     Input to case:    500 VDC
     Input to output:  500 VDC
     Output to case: 100 VDC
ENVIRONMENT:
     Storage temperature: -55°C to +150°C
     Shock:          50 G's
     Acceleration: 500 G's
     Vibration:      30 G's
     Grades EU, R & S:
          Full Output Power at Tcase = +85°C
          Linearly derates to zero at Tcase = +115°C
     Grades RE & SE:
          Full Power Output at Tcase = +125°C
          Linearly derates to zero at Tcase = +135°C
WEIGHT: 90 grams maximum

 

 

 Page Added 09/30/2006